ROSS DECCO Company | Made in the USA for more than 100 Years
ROSS DECCO Comapany
All Categories > Industrial Solenoids > Series 710 Packaged AC Industrial Solenoids with Plug-in Receptacle > View Items  
Download PDF Download PDF     Printable Page     Email Email This Page     Save To Favorites Save To Favorites

Series 710 Packaged AC Industrial Solenoids with Plug-in Receptacle

Check up to five results to perform an action.


Force - 4.50 to 10.25 Lbs.
Stroke -0.50 Inch Max.


These "packaged" solenoids are Decco Model 15, 16, 17 or 18 solenoids, mounted in a zinc alloy die-cast cover. The mounting is a ROSS DECCO standard and is interchangeable with Decco Series 171 Oil Immersed Solenoids.

Forces and electrical characteristics for Decco packaged solenoids are the same as standard Teen Series solenoids.

The maximum stroke for packaged solenoids is 0.50 inch which will meet most valve applications. These units are equipped with a manual actuator.

Four captive screws permit mounting directly on the valve body or to an intermediate die-cast adaptor plate.

The plug-in connector permits easy replacement in the field. The female receptacle can be mounted in the valve body or in the adaptor plate which screws directly on the valve body. Twelve inch wire leads are also available.

The standard unit is equipped with a heat treated beryllium copper captive push pin.

Each standard Decco "packaged" solenoid is shipped with one vellumoid gasket. Adaptor plate, extra vellumoid gasket, female receptacle with 12 inch leads and palm button manual actuator are optional at extra cost.

Coils are available for use on 12 to 480 Volts, 60 Hertz and 12 to 460 Volts, 50 Hertz.




   
  Results 1 - 4 of 4 1 

Item #

Force

Maximum Stroke

Holding Force

Model 15 4.50 to 10.25 lb 0.50 in 8 lb
Model 16 4.50 to 10.25 lb 0.50 in 12 lb
Model 17 4.50 to 10.25 lb 0.50 in 16 lb
Model 18 4.50 to 10.25 lb 0.50 in 18.5 lb
  Results 1 - 4 of 4 1 
ROSS DECCO Company | Made in the USA for more than 100 Years