ROSS DECCO Company | Made in the USA for more than 100 Years
ROSS DECCO Comapany
All Categories > Pilots for Pneumatic Valves > M-12 Thread Stem Pilots > Item # P-265  
Download PDF Download PDF     Printable Page     Email Email This Page     Save To Favorites Save To Favorites

Item # P-265, Pipe Spud



Available in a variety of AC and DC models, Decco Pilots offer a choice of DIN 43650, ISO, 1/2" pipe spud or 12" lead electrical connections.

All models are rated for continuous service and utilize class 130ºC insulation.

Decco Pilots are usually built three-way/normally closed. The addition of an alternate connection at the top can convert them to three-way/normally open. Two-way/normally closed models are also available.

All pilots shown here are standard, but special modifications can be made to meet your requirements.






Specifications

Insulation Rating

130 ºC

Wattage DC

6 W Holding

Seals

Buna N (525L)

Maximum Temperature Rise

70 ºC

Voltage DC (Standard)

12 V
24
V
110
V

Duty Factor

Continuous

Stroke (AC & DC)

0.025 ± 0.003 in

Orifice Diameter (Inlet)

0.031 to 0.062

Orifice Diameter (Exhaust)

0.031 to 0.062

Exhaust Orifice Thread1

10-32 x 0.190

"O" Rings

5-682-N674-7

Minimum Inlet Pressure

2 bar
29
psi

Maximum Inlet Pressure

10.3 bar
150
psi

Wire Leads

Stranded, 18 ga., 12"

NEMA 4 Construction

Standard
1 No thread on 1/2 W


 MORE IMAGES 

·  M-12 Thread ISO Connector

·  M-12 Thread Pipe Spud

·  M-12 Thread Lead Wire

·  M12 x 0.5 Class 6g Metric Thread

·  Recommended Dimensions for Orifice Seat

·  M12-Pilot-Picture

·  M12-Pilot-Picture2

·  M12-Pilot-Picture-with-1-2-X-14-NPT


ROSS DECCO Company | Made in the USA for more than 100 Years