ROSS DECCO Company | Made in the USA for more than 100 Years
ROSS DECCO Comapany
All Categories > Pilots for Pneumatic Valves > 450 Series Screw Mount Pilots > Item # P-455  
Download PDF Download PDF     Printable Page     Email Email This Page     Save To Favorites Save To Favorites

Item # P-455, ISO



Available in a variety of AC and DC models, Decco Pilots are adaptable to a wide range of valves. All models are rated for continuous service and utilize class 130ºC insulation.

Our low cost 450 Series Screw Mount Pilot is securely held in position by two standard M3 x 0.5 mounting screws which run through its entire molded coil assembly. Simple in design and easy to install. This 6.5w AC or DC unit has ISO electrical connections.

Decco Pilots are usually built three-way/normally closed. The addition of an alternate connection at the top can convert them to three-way/normally open. Two-way/normally closed models are also available.

All pilots shown here are standard, but special modifications can be made to meet your requirements.






Specifications

Type

AC

Insulation Rating

130 ºC

Wattage AC

6.5 W Holding

Seals

Buna N (525L)

Maximum Temperature Rise

70 ºC

Voltage AC (Standard)

24-50 V
110
V
120
V
220
V
240
V

Frequency

50 Hz
60
Hz

Duty Factor

Continuous

Stroke (AC & DC)

0.02 ± 0.003 in

Orifice Diameter (Inlet)

0.062 Max

Orifice Diameter (Exhaust)

0.062 Max

Exhaust Orifice Thread

10-32 x 0.190

"O" Rings

2-015-N674-70

Minimum Inlet Pressure

2 bar
29
psi

Maximum Inlet Pressure

10.3 bar
150
psi

Wire Leads

ISO Only

NEMA 4 Construction

Available


 MORE IMAGES 

·  450 Series Screw Mount-2

·  450 Series Screw Mount-3

·  Recommended Dimensions for Orifice Seat


ROSS DECCO Company | Made in the USA for more than 100 Years